Project 1 submission

Project 1: Shade

 

Process of this project:

_ 1st step:   

·         Download the similar model from internet

·         Then modify it according to the concept

·         Divide the hemisphere

·         Made a double layer in each part border line-to have stability

_2nd step:

·         convert the stl file to flashmob file

·         Print the model- each part in 3d printer, upper part needed 7.5 hours and lower part needed 5 hours.

(It was necessary to print each part in different way to achieve better workmanship

 in outer surface: upper part, inner surface: loser part. Because that parts where more visible.)

_3^rd step:

·         Built the base of the shade

·         It was important to hide all light accessories in there.

·         Measure all the light fixing material(like: battery, switch)

·         According to that construct the base box

_4^th step:

·         Setup the wiring with small led light

·         Fix the wiring with battery

·         Then these four wires had to joint with switch board

·         So that the whole model is very easily movable and just switch on the light anywhere